Additives for Wood Coatings
Decorative and protective finishes on a porous, variable natural substrate where tactile feel matters as much as measurable performance.
Surface control for substrates that are never twice the same.
What makes this sector difficult
Uneven wetting across grain and end grain
Grain raising and fibre lifting in waterborne systems
Controlled slip and hand feel on furniture surfaces
Clarity and depth of the grain after the topcoat
Additive families for Wood Coatings
Dispersing Additives
Wetting and dispersing agents for efficient pigment wetting, full colour development, faster grinding and long-term resistance to re-agglomeration in waterborne, solventborne and UV systems.
Defoamers
Mineral oil, polysiloxane and polymer defoamers that control process foam, persistent microfoam and film surface defects across production, let-down and application stages.
Wetting Agents
Substrate wetting additives that lower surface tension so the coating reliably wets low-energy and contaminated surfaces without dewetting, edge retraction or craters.
Leveling Agents
Flow and leveling additives that manage surface tension gradients so the film levels out evenly, with controlled slip, mar resistance and a uniform appearance.
Send us your wood coatings formulation problem
Include the binder system, substrate, application method and the defect. We will come back with an additive route and a dosage starting point.